QSPE Landscape Fountain Pump
Product Introduction
- The pump should operate fully submerged in water, with a submersion depth not less than 0.5 meters and not greater than 40 meters. The environmental water temperature should not exceed 40°C.
- The working medium should be non-corrosive clear water, with a sand content not exceeding 0.1%, and a pH value between 6.5 and 8.5.
- The power supply should be three-phase 50 Hertz with a rated voltage of 380 volts, and the supplied voltage must be maintained within the range of 342 to 420 volts.
- The pump should be used within the applicable range near the rated head.
| No. | Pump Model | Flow Rate (m³/h) | Head (m) | Power (kw) | Caliber (Inch) |
|---|---|---|---|---|---|
| 1 | QSPE15-10-0.75 | 15 | 10 | 0.75 | 3 |
| 2 | QSPE10-10-0.55 | 10 | 10 | 0.55 | 3 |
| 3 | QSPE10-14-0.75 | 10 | 14 | 0.75 | 3 |
| 4 | QSPE15-7-0.55 | 15 | 7 | 0.55 | 3 |
| 5 | QSPE15-14-1.1 | 15 | 14 | 1.1 | 3 |
| 6 | QSPE40-6-1.1 | 40 | 6 | 1.1 | 3 |
| 7 | QSPE25-9-1.1 | 25 | 9 | 1.1 | 3 |
| 8 | QSPE25-12-1.5 | 25 | 12 | 1.5 | 3 |
| 9 | QSPE40-8-1.5 | 40 | 8 | 1.5 | 3 |
| 10 | QSPE15-26-2.2 | 15 | 26 | 2.2 | 3 |
| 11 | QSPE20-20-2.2 | 20 | 20 | 22 | 3 |
| 12 | QSPE25-17-2.2 | 25 | 17 | 22 | 3 |
| 13 | QSPE40-13-2.2 | 40 | 13 | 2.2 | 3 |
| 14 | QSPE65-7-2.2 | 65 | 7 | 2.2 | 3 |
| 15 | QSPE40-16-3 | 40 | 16 | 3 | 3 |
| 16 | QSPE40-18-3 | 40 | 18 | 3 | 3 |
| 17 | QSPE45-16-3 | 45 | 16 | 3 | 3 |
| 18 | QSPE25-25-3 | 25 | 25 | 3 | 3 |
| 19 | QSPE32-20-3 | 32 | 20 | 3 | 3 |
| 20 | QSPE50-13-3-3 | 50 | 13 | 3 | 3 |
| 21 | QSPE65-10-3 | 65 | 10 | 3 | 3 |
| 22 | QSPE100-6-3 | 100 | 6 | 3 | 3 |
| 23 | QSPE40-21-4 | 40 | 21 | 4 | 3 |
| 24 | QSPE40-24-4 | 40 | 24 | 4 | 3 |
| 25 | QSPE65-13-4 | 65 | 13 | 4 | 3 |
| No. | Pump Model | Flow Rate (m³/h) | Head (m) | Power (kw) | Caliber (Inch) |
|---|---|---|---|---|---|
| 26 | QSPE80-12-4 | 80 | 12 | 4 | 3 |
| 27 | QSPE100-9-4 | 100 | 9 | 4 | 3 |
| 28 | QSPE40-28-5.5 | 40 | 28 | 5.5 | 3 |
| 29 | QSPE45-25-5.5 | 45 | 25 | 5.5 | 3 |
| 30 | QSPE60-20-5.5 | 60 | 20 | 5.5 | 3 |
| 31 | QSPE65-18-5.5 | 65 | 18 | 5.5 | 3 |
| 32 | QSPE100-12-5.5 | 100 | 12 | 5.5 | 3 |
| 33 | QSPE120-10-5.5 | 120 | 10 | 5.5 | 4 |
| 34 | QSPE200-5-5.5 | 200 | 5 | 5.5 | 6 |
| 35 | QSPE220-5-5.5 | 220 | 5 | 5.5 | 3 |
| 36 | QSPE65-25-7.5 | 65 | 25 | 7.5 | 3 |
| 37 | QSPE80-20-7.5 | 80 | 20 | 7.5 | 3 |
| 38 | QSPE100-17-7.5 | 100 | 17 | 7.5 | 3 |
| 39 | QSPE150-10-7.5 | 150 | 10 | 7.5 | 3 |
| 40 | QSPE250-8-7.5 | 250 | 8 | 7.5 | 3 |
| 41 | QSPE120-18-7.5 | 120 | 18 | 7.5 | 3 |
| 42 | QSPE300-6-7.5 | 300 | 6 | 7.5 | 3 |
| 43 | QSPE100-15-7.5 | 100 | 15 | 7.5 | 3 |
| 44 | QSPE20-30/2-3 | 20 | 30 | 3 | 3 |
| 45 | QSPE25-34/2-4 | 25 | 34 | 4 | 3 |
| 46 | QSPE25-36/2-4 | 25 | 36 | 4 | 3 |
| 47 | QSPE25-38/2-4 | 25 | 38 | 4 | 3 |
| 48 | QSPE20-40/2-4 | 20 | 40 | 4 | 3 |
| 49 | QSPE30-26/2-4 | 30 | 26 | 4 | 3 |
| 50 | QSPE30-30/2-4 | 30 | 30 | 4 | 3 |
| No. | Pump Model | Flow Rate (m³/h) | Head (m) | Power (kw) | Caliber (Inch) |
|---|---|---|---|---|---|
| 51 | QSPE15-52/3-4 | 15 | 52 | 4 | 3 |
| 52 | QSPE40-30/2-5.5 | 40 | 30 | 5.5 | 3 |
| 53 | QSPE30-45/3-5.5 | 30 | 45 | 5.5 | 3 |
| 54 | QSPE20-50/3-5.5 | 20 | 50 | 5.5 | 3 |
| 55 | QSPE20-54/3-5.5 | 20 | 54 | 5.5 | 3 |
| 56 | QSPE30-36/2-5.5 | 30 | 36 | 5.5 | 3 |
| 57 | QSPE25-44/2-5.5 | 25 | 44 | 5.5 | 3 |
| 58 | QSPE15-65/4-5.5 | 15 | 65 | 5.5 | 3 |
| 59 | QSPE40-40/2-7.5 | 40 | 40 | 7.5 | 3 |
| 60 | QSPE50-36/3-7.5 | 50 | 36 | 7.5 | 3 |
| 61 | QSPE80-22/2-7.5 | 80 | 22 | 7.5 | 3 |
| 62 | QSPE120-18/2-7.5 | 120 | 18 | 7.5 | 3 |
| 63 | QSPE25-60/3-7.5 | 25 | 60 | 7.5 | 3 |
| 64 | QSPE30-54/3-7.5 | 30 | 54 | 7.5 | 3 |
| 65 | QSPE20-75/3-7.5 | 20 | 75 | 7.5 | 3 |